Tag : sewcialists

The Crafty Lass does… Halloween!

I know, I think I'm crazy sometimes too. I could have just bought a costume... But I WANTED to make one. Little Freddie has suddenly become very interested in Mummy's sewing machine - and thinks it is magic that I can take fabric and turn into something 'for you'. How perfect then, to make him a little 'wizard' outfit for Halloween!

CLOAK

Ingredients:

Fabric

Ribbon

Thread

Tools:

Sewing Machine

Scissors

Iron and Ironing Board (optional)

Method:

  1. Choose your fabrics! I have used a crushed stretch velvet for one side of this cloak and a fine netting with shiny stars on for the other. But, you could of course do both sides the same! Both of my chosen fabrics are by Visage Textiles from Hobbycraft.
  2. Measure. In terms of what to measure and cut out: the basic shape is a large rectangle. You will need one in each fabric (or the same fabric if you plan on doing the same on both sides.) You would need to adjust the size based on who you are making this for - but I measured the height of Freddie down to his mid-calf length and then used the full width of the material to give you a guide. You may want yours to be longer, narrower etc - but that gives you an idea! Just enough to go around the shoulders and down to the ground.
  3. Assemble. Lay out your two fabric rectangles right sides together and pin around the edge to secure into place.
  4. Ribbons.  I have used two strands of ribbon as the ties at the front of the cloak. Start by finding the mid point across one of the longer edges of your rectangle. Then, working outwards from this mid point insert the ribbons equally apart and pin to secure so that they are sandwiched inside your two fabrics. For Freddie's cloak they are about 20cms apart. It will need to just be enough of a gap for the wearer's neck.
  5. Sew - construct. In a simple straight stitch, sew all the way around the edge allowing a 1cm seam allowance. Leave a small gap for turning out the right way along one of the edges.
  6. Turn out. Turn out the correct way and if required, press with an iron.
  7. Sew - decoration. Sew around all four edges to secure everything in to place - I have chosen to use a decorative stitch for this, but it is completely up to you!
  8. Ribbon edge. As an optional extra finish I have folded the two edges of ribbons over and also stitched them down - this was purely as the ribbon I chose to use (a satin ribbon) was fraying alot, your ribbon may not need to be sewn down.

Et voila - one cloak! If you decide to give this a go, and need further help or ideas, please don't hesitate to get in touch. Drop me a message on any of The Crafty Lass social media.

HAT

Ingredients:

Fabric

Interlining/strong Interfacing Fabric

Thread

Tools:

Sewing Machine

Scissors

Method:

The main concept of how to make this hat - was from this 'MakerFreak' video: "10 Minute Harry Potter Wizard Hat"... It did take me longer than 10 mins! But, in time if you were making quite a few of these I can understand how it is a very quick make indeed. This tutorial also only shows how to put fabric on the outside of the hat - I decided to line my one also. So, follow the video as far as the final stage, but I also separately made a slightly smaller triangle (this will make sense once you watch the video!) for the inside and then before sewing around the bottom edge to secure, I pinned everything into position tucking all raw edges neatly inside.

The other thing to note is that for this to match Freddie's cloak; I layered up the fabrics: The crushed velvet with starry netting over the top for the outside in a double layer. Then it is the interfacing as the main structure, and just the crushed velvet on the inside. Again, I have chosen to do a decorative stitch around the bottom of the hat just to make it look extra special - but it doesn't alter the make if you wanted to just do something plainer!

PERSONALISED BUCKET

Ingredients:

Bucket

Cricut Holographic Vinyl

Cricut Transfer Tape (Optional)

Tools:

Cricut Maker Machine

Method:

Using the Cricut 'Design Space' app I have simply made some star shapes and then font for 'Freddie's Treats'. Using the holographic foil setting on the Cricut Maker* the shapes and text has been 'kiss cut' out and I simply added on to a plain small black bucket. A simple make - yet I think it is effective - and Freddie loves he has his own personalised sweetie container for Halloween!

*The Cricut Maker was gifted but all opinions expressed are my own.

 

Categories: Business, Crafty Kids, General Craft, The Crafty Lass does...

The Crafty Lass does… World Book Day!

Sometimes, I get an idea in my head – and that’s it, the idea HAS to be done. It doesn’t matter whether that is going to take me all day and all night (and then all day and all night again) to complete whatever hair brained challenge I have set myself, or whether it is something with a long-term plan – it will go on ‘the list’.

The husband does laugh, as he is aiming to be ‘paperless’ – using apps to write lists, schedule and remember tasks, whereas I HAVE to have my notebook. And it is currently an Anthropologie notebook that says ‘the best is yet to come’ and, my bright, happiness bringing, lime green Lamy fountain pen. So specific! However, writing everything down in that notebook that needs to be done that day, week, month, year – it makes me focus! I cross off what has been achieved and I remember what I need to be doing next. Heaven forbid if it ever got lost!

My ‘crazy’ crafty ideas often surface at about 2am when up resettling our little man whilst trying to stay awake in the bit once he is asleep, but I cannot leave the room. The trouble is, I then can’t stop thinking about it – so I drift off again at 3am still wondering about things like ‘but how would I make that?’ or ‘I wonder if Hobbycraft sell X, Y, and Z’ – ‘maybe I could get there tomorrow somehow…’

That is precisely what happened with World Book Day.

A simple poster spotted at nursery – a reminder to come as your favourite book character on Thursday 7th March - World Book Day!

Well, challenge accepted.

First I was thinking, what do we already have that could be worn and fit in to one of his many favourite book themes? Or, could maybe be slightly tweaked? Then, out of nowhere came the idea that I could try and replicate The Very Hungry Caterpillar Butterfly… Well, once it was in my head – there was no going back. I had set myself my own high standard challenge and I HAD to make it. I started to think about all the colourful fabrics we had in the studio and how I could incorporate lots of prints and patterns to try and match the beautiful and eclectic drawings in the Eric Carle iconic children’s book.

In the morning, I measured our little man to see if I could then make the wings to his ‘full height’, like the illustrations. I raided the remnants bin, and started to cut the shapes out. Effectively, trying to 'draw' with fabric.

It soon became apparent I had set myself quite a task to cut and applique on all the different shapes, colours and patterns, but I was enjoying myself… and isn’t that kind of the point with craft?!

As the day and then evening wore on, the first wing began to take shape – and I could see how big it was going to be! I started to wonder if the wings really could be worn by a toddler… As much as they would match his height – maybe they would be just a pain for him to carry round? (That’s if I could even get him to put them on!)

Evening 1 = 1 wing completed. One to go…

The beauty of the amazing artwork in The Very Hungry Caterpillar – is they are so unique, and the two sides of the butterfly don’t match! So, I could be creative with what fabrics to pick and choose for each side.

Evening 2 = 2nd wing. Done!

Once the wings were now initially made, the next challenge was how to make them into something that could actually be worn. I thought about ribbons to pull around the shoulders. But, they would likely slip off the shoulders. So then, maybe attaching them to an outfit could work? But as I wanted them to be worn by either toddler, or likely adult, it needed to be something flexible.

The next day, off to Hobbycraft we went... elastic! – I suddenly thought about how fairy wings are assembled – and decided I would make a central panel to attach the wings to, and some elastic loops to swiftly enable the wings to be taken on and off as and when pleased!

I also found some Vilene fabric interfacing. Normally used for things like curtain pelmets – but it was perfect! This could be attached to the fabric wings to make them stiff, and essentially make the design stick out like actual wings! I also picked up some really bright blue felt – lovely and soft, and a nice plain contrast to the rather crazy ‘front’, to put on the back behind this new interfacing.

Evening 3. I lay out the fabric wings on to the interfacing and backing felt, then sewed around the edge and then basically just trimmed to the shapes required!

Evening 4. The final evening (also note, the night before World Book Day so it had to get finished come hell or high water!) I made a small and simple rectangular panel out of some coordinating fabric, with elastic loops tucked inside to allow the arms to go through. I also used some more of the interfacing inside to make this panel nice and strong – before simply sewing the edges of the wings on to it. DONE!

It really isn’t my ‘finest’ of sewing – most of the fabrics have ‘raw’ edges, and there are places where it could be improved – but does it really matter? It hopefully looks like the book, it will hopefully bring little man some joy - and importantly, I really did enjoy making them!

I then did honestly proceed to wear them round the house for about an hour – for no reason other than because I could! Within this hour, I also tried to work out what I could do if he wouldn’t wear the wings. I mean, in all honesty – no secret about it, I would love to wear them for nursery drop off – but it would actually mean he didn’t have a costume! And, I am not sure the point of all of this, is for the Mummy and Daddy's to be dressed up, but the kiddiwinks not!!!

Aha – well, I found his green trousers, and we definitely have a green stripey top. Perfect for a little caterpillar.  AND THEN – I remembered  (and then very handily FOUND!) that we were given a Very Hungry Caterpillar hand knitted hat for when he was a baby. Would it fit?! Unlikely but I could give it a go if needed in the morning…

World Book Day.

I asked little man to try on the wings – he looked at me like I was crazy but did let me put them on him. What he actually wanted to do was take them off and look at all the colours! He looked so lovely with these huge colourful prints emerging from his beautiful tiny body. But, within 5 minutes – they were off. I put them on, and he laughed – so, if it made him smile – that I suppose was worth it in all reality – who cares who wore them. He was happy.

Into the green 'outfit' for him, and by some crazy knitted-stretchy miracle, the found Very Hungry Caterpillar baby hat did indeed (just!) fit!

So, we rocked up to nursery with him as a caterpillar, and me as the butterfly. It kind of worked! #teamwork

I left the wings at nursery for staff to use for the day if they wanted, and apparently lots of the children liked all the colours and textures on them! 🙂

So, that is it for this year, World Book Day – done! It has been crossed off 'the list'.

The trouble is, I have now set a precedent. What will I make next year?!

In the meantime, at the point of collecting him from his day at nursery, the World Book Day costume sign had come down – and a new one put up in it’s place.

'Dress as a Disney character – Friday 15th March!'

I had best get my thinking cap on…

World Book Day - The Very Hungry Caterpillar

Categories: Crafty Kids, General Craft, The Crafty Lass does...

Facebook
Facebook
Pin!
Pin!
Instagram